TOP > More Detailed Information of Products > Medical Devices (Asahi Intecc Brand Products) > PCI > MINAMO
Round Press Core | |
---|---|
Torque Response | + |
Durability (3D) | + |
Shape / Reshape | + |
MINAMO: Ni-Ti Core at the tip exhibits quick initial response to the tip and excellent controllability by the SUS Round Press Core and ACT ONE.
By including ACT ONE in a Ni-Ti Core, high durability can be maintained even under long procedure time and quick movement.
* +: No deformation, -: deformation
Disadvantage in wire disarray
- Getting caught/breaking in stent strut
- Sliding friction and getting stuck with other devices
* +: No deformation, -: deformation
- Easy shapeability: close to that of a flat core, prevents 3D shaping, reshapeable
- Tip Shape acts as indicator for shaping direction
- New shaping needle that enables easier shaping is attached
- Use of ACT ONE allows for higher shape retention and reshapeability.
*The above data was obtained by company standardized, which may differ from industry standardized tests.
*The above data does not prove that all devices have exactly the same performance with the samples used for these tests.
Product | Catalog No. | Usable length | Coil length | Radiopaque Length | Outer Dimeter | Tip shape | Clip color |
---|---|---|---|---|---|---|---|
MINAMO | AH14R026S | 190cm | 20cm | 3cm | 0.36mm (0.014inch) |
Straight | |
AH14R326S | 300cm | ||||||
AH14R026J | 190cm | 20cm | 3cm | 0.36mm (0.014 inch) |
J-shape |
||
AH14R326J | 300cm | ||||||
AH14R026P | 190cm | 20cm | 3cm | 0.36mm (0.014inch) |
Pre-shape |
||
AH14R326P | 300cm |
Coated with SLIP-COAT® coating.
“MINAMO”, “ACT ONE”, “SION” and “Corsair” are trademarks or registered trademarks of ASAHI INTECC CO., LTD. in Japan and other countries.
All other trademarks are the property of their respective owners.