TOP > More Detailed Information of Products > Medical Devices (Asahi Intecc Brand Products) > PCI > MINAMO

MINAMO

SUS Round Press Core

SUS Round Press Core

  Round Press Core
Torque Response +
Durability (3D) +
Shape / Reshape +

Torque Response

MINAMO: Ni-Ti Core at the tip exhibits quick initial response to the tip and excellent controllability by the SUS Round Press Core and ACT ONE.

Torque Response

Durability

ACT ONE + Ni-Ti Core

By including ACT ONE in a Ni-Ti Core, high durability can be maintained even under long procedure time and quick movement.

Durability

* +: No deformation, -: deformation

Coil Strength

Disadvantage in wire disarray

  • Getting caught/breaking in stent strut
  • Sliding friction and getting stuck with other devices

Coil Strength

* +: No deformation, -: deformation

Shape/Reshape

  • Easy shapeability: close to that of a flat core, prevents 3D shaping, reshapeable
  • Tip Shape acts as indicator for shaping direction
  • New shaping needle that enables easier shaping is attached
  • Use of ACT ONE allows for higher shape retention and reshapeability.

*The above data was obtained by company standardized, which may differ from industry standardized tests.
*The above data does not prove that all devices have exactly the same performance with the samples used for these tests.

Structure & ordering information

Structure & ordering information

Product Catalog No. Usable length Coil length Radiopaque Length Outer Dimeter Tip shape Clip color
MINAMO AH14R026S 190cm 20cm 3cm 0.36mm
(0.014inch)
Straight Clip color
AH14R326S 300cm
AH14R026J 190cm 20cm 3cm 0.36mm
(0.014 inch)
J-shape
J-shape
AH14R326J 300cm
AH14R026P 190cm 20cm 3cm 0.36mm
(0.014inch)
Pre-shape
Pre-shape
AH14R326P 300cm

Coated with SLIP-COAT® coating.

“MINAMO”, “ACT ONE”, “SION” and “Corsair” are trademarks or registered trademarks of ASAHI INTECC CO., LTD. in Japan and other countries.
All other trademarks are the property of their respective owners.

Top