TOP > More Detailed Information of Products > Medical Devices (Asahi Intecc Brand Products) > PCI > ASAHI Gaia

ASAHI Gaia

SION TECC

Entry

Entry

Micro-cone tip

The micro-cone tip makes it easier to create the entry route to the hard tissue and fibrous cap.

ASAHI Gaia micro-cone tip / Conventional guide wire ball tip

Three different tip loads

Possibility to choose Gaia version depending on morphology of the lesion.

Three different tip loads

Deflection control

Deflection control

Flexible tip

Flexible tip

The above data was obtained by company standardized test, which may differ from industry standardized tests.
The above data does not guarantee that all devices have exactly the same performance with the samples used for these tests.

ASAHI Gaia

By taking advantage of tip flexibility, ASAHI Gaia easily avoids hard tissue and advances smoothly.

Conventional stiff guide wire

A stiffer wire is less likely to deflect, causing it to proceed in a straight direction only.

1mm pre-shaped tip

The pre-shaping of the tip is incorporated in the production process, significantly increasing tip shape retention.

1mm pre-shaped tip

Directional control

Directional control

Intentional manipulation

Intentional manipulation

All the data were obtained by company standardized test, which may differ from industry standardized tests.
All the data do not guarantee that all devices have exactly the same performance with the samples used for tests.

Enhanced torque response broadens possibility of intentional manipulation.

ASAHI Gaia

ASAHI Gaia

Efficient transmission of proximal rotation to the distal tip.

Conventional guide wire

Conventional guide wire

Less efficient transmission of torque due to resistance, causing whip.

Structure & ordering information

Structure & ordering information

Product Catalog No. Diameter Coating type Usable
length
Spring coil
length
Radiopaque
length
Tip shape
ASAHI Gaia First AHW14R007P 0.36/0.26mm
(0.014/0.010inch)
SLIP-COAT® 190cm 15cm 15cm 1mm
pre-shape
AHW14R307P 300cm
ASAHI Gaia Second AHW14R008P 0.36/0.28mm
(0.014/0.011inch)
SLIP-COAT® 190cm 15cm 15cm 1mm
pre-shape
AHW14R308P 300cm
ASAHI Gaia Third AHW14R011P 0.36/0.30mm
(0.014/0.012inch)
SLIP-COAT® 190cm 15cm 15cm 1mm
pre-shape
AHW14R311P 300cm

Coated with SLIP-COAT®coating.

“ASAHI” and “ASAHI Gaia” are trademarks or registered trademarks of ASAHI INTECC CO., LTD. in Japan and other countries.

Top