TOP > More Detailed Information of Products > Medical Devices (Asahi Intecc Brand Products) > IVR > STRIDE
Stride 2.6Fr (0.88mm) is designed as a High-Flow Micro-catheter which allows easier insertion of embolic materials and infusion agents.
- 0.027inch (0.69mm) wide lumen
- Realizes easy insertion of high-flow embolic and viscous agents.
- 2.6Fr (0.88mm) distal outer diameter
- Enables distal approaches to narrow down infusion area.
Facilitates smooth insertion of sharp-angled guide wires and embolic materials.
To prevent kinking of catheter, maintains a consistent lumen diameter even in tortuous vessels for smooth guide wire control and delivery of embolic materials.
Gradually tapered shaft promotes smooth force transition which enhances catheter pushability at the proximal part and trackability at the distal part.
Atraumatic to vessel wall, helps in the maneuvering of catheter over curved vessels.
Enhances smooth passage of guide wire, embolic materials and infusion agents.
Catalog No. | Usable length |
Most flexible length |
Flexible length |
O.D. of distal shaft |
O.D. of proximal shaft |
I.D. of shaft |
Max. guide wire |
Hydrophilic coating |
Max. pressure |
Tip shape |
---|---|---|---|---|---|---|---|---|---|---|
STD105-22S | 105cm | 2cm | 28cm | 0.74mm (2.2Fr.) |
0.95mm (2.9Fr.) |
0.52mm (0.020inch) |
0.41mm (0.016inch) |
65cm | 5,520kPa (800psi) |
Straight |
STD125-22S | 125cm | 2cm | 28cm | 0.74mm (2.2Fr.) |
0.95mm (2.9Fr.) |
0.52mm (0.020inch) |
0.41mm (0.016inch) |
65cm | 5,520kPa (800psi) |
Straight |
STD125-22A | 125cm | 2cm | 28cm | 0.74mm (2.2Fr.) |
0.95mm (2.9Fr.) |
0.52mm (0.020inch) |
0.41mm (0.016inch) |
65cm | 5,520kPa (800psi) |
Angled 45° |
STD130-22S | 130cm | 2cm | 28cm | 0.74mm (2.2Fr.) |
0.95mm (2.9Fr.) |
0.52mm (0.020inch) |
0.41mm (0.016inch) |
65cm | 5,520kPa (800psi) |
Straight |
STD150-22S | 150cm | 2cm | 28cm | 0.74mm (2.2Fr.) |
0.95mm (2.9Fr.) |
0.52mm (0.020inch) |
0.41mm (0.016inch) |
100cm | 5,520kPa (800psi) |
Straight |
Catalog No. | Usable length |
Most flexible length |
Flexible length |
O.D. of distal shaft |
O.D. of proximal shaft |
I.D. of shaft |
Max. guide wire |
Hydrophilic coating |
Max. pressure |
Tip shape |
---|---|---|---|---|---|---|---|---|---|---|
STD105-26S | 105cm | 2cm | 20cm | 0.88mm (2.6Fr.) |
0.97mm (2.9Fr.) |
0.69mm (0.027inch) |
0.53mm (0.021inch) |
65cm | 5,520kPa (800psi) |
Straight |
STD125-26S | 125cm | 2cm | 20cm | 0.88mm (2.6Fr.) |
0.97mm (2.9Fr.) |
0.69mm (0.027inch) |
0.53mm (0.021inch) |
65cm | 5,520kPa (800psi) |
Straight |
STD150-26S | 150cm | 2cm | 20cm | 0.88mm (2.6Fr.) |
0.97mm (2.9Fr.) |
0.69mm (0.027inch) |
0.53mm (0.021inch) |
100cm | 5,520kPa (800psi) |
Straight |
Flow rate
Test condition : Temperature: 37℃ Linear rise seconds: 0.3sec; Flow rate: 3.0ml/sec; Volume: 10ml
Iodine content | French size | Usable length | 600psi | 800psi | Dead volume |
---|---|---|---|---|---|
Iopamiron 300 mg/ml |
Stride 2.2 | 105cm | 1.2 ml/sec | 1.6 ml/sec | 0.37ml |
125cm | 1.0 ml/sec | 1.4 ml/sec | 0.41ml | ||
130cm | 1.0 ml/sec | 1.2 ml/sec | 0.43ml | ||
150cm | 0.9 ml/sec | 1.1 ml/sec | 0.46ml | ||
Stride 2.6 | 105cm | 3.3 ml/sec | 4.5 ml/sec | 0.54ml | |
125cm | 3.0 ml/sec | 3.7 ml/sec | 0.61ml | ||
150cm | 2.6 ml/sec | 3.3 ml/sec | 0.71ml |
Iodine content | French size | Usable length | 600psi | 800psi | Dead volume |
---|---|---|---|---|---|
Iopamiron 370 mg/ml |
Stride 2.2 | 105cm | 0.6 ml/sec | 0.7 ml/sec | 0.37ml |
125cm | 0.5 ml/sec | 0.6 ml/sec | 0.41ml | ||
130cm | 0.5 ml/sec | 0.6 ml/sec | 0.43ml | ||
150cm | 0.4 ml/sec | 0.5 ml/sec | 0.46ml | ||
Stride 2.6 | 105cm | 2.1 ml/sec | 2.5 ml/sec | 0.54ml | |
125cm | 1.5 ml/sec | 2.1 ml/sec | 0.61ml | ||
150cm | 1.2 ml/sec | 1.6 ml/sec | 0.71ml |
“STRIDE” is trademarks or registered trademarks of ASAHI INTECC CO., LTD. in Japan and other countries.
Stride 2.2Fr is designed as a Super-Selective Micro-catheter which enables approaches to far desired targets.